| Trade - Want to Buy |
| Topic | Multi Copper Wire Drawing Machine With Annealer |
| Name | Mandy Yang |
| Company | Jiangsu Jiacheng Technology Co. , Ltd |
| Address | Juqiao Economic Development Zone, Tangqiao Town, Z |
| Phone | 8618051877167 |
| Mobile | 8618051877167 |
| Fax | |
| Country | 中国 |
| Date Created | 8/6/2015 7:53:26 AM |
| Message | Main features of Multi Copper Drawing machine:
Muti (8 wires)wire drawing machine with annealer is used to drawing Φ0.1-0.8mm. Easy to maintain, simple to operate and low noise, high efficiency.
Multi Copper Drawing machine Components :
1. Bobbin or Coiler pay-off
2. Main drawing machine
3. Continuous annealer machine
4. Tension control device
5. Dual-spooler automatic take-up or single bobbin automatic take up
6. Electric control system
7. Gearbox lubrication system
8. Drawing liquid supplying system
9. Annealing water supplying system
10. Pointing and threading machine
11. Steam generator
Technical Parameters of Multi Copper Drawing machine:
Inlet diameter(tensile strength)
: Max. 8*1.80mm (250N/mm2) for finish 0.40mm
Outlet diameter
Φ0.15-Φ0.40mm
Number of Dies
: 8*21
Max Line speed
: 1800m/min
Drawing capstan
: zirconium oxide porcelain
Slip of ratio of m/c
: 20%+16%
Take up Bobbin
:DIN 630/500 ( Or according to customer
Noise level
:< 85 dbA (Except for main motor ) AC Motor
Main motor power
90kw
Fix capstan diameter
100mm with 8 grooves
Max. Annealing voltage
DC 60V
Max annealing current
DC1200
|
| |
|
|
