| Trade - Want to Buy |
| Topic | Coal Slime Dryer |
| Name | Coal Slime Dryer |
| Company | Henan Zhongke Machinery CO ., Ltd |
| Address | Ruida Road |
| Phone | 86-0371-67996718 |
| Mobile | 13838093345 |
| Fax | 86-0371-67103886 |
| Country | China |
| Date Created | 11/25/2011 9:12:26 PM |
| Message | Coal Slime Dryer
Coal Slime Drying Machine Instructions
http://www.kf-machinery.com/coal-slime-dryer.html
1)The mechanical structure and working principle of the Dryer:
Coal slime dyer mainly by heat, scatter device, belt type feeder, feeding machine, rotary roller, belt discharging machine, induced draft fan (offer: roof fan), unloading distribution ark feeder and composition .coal slime dyer
working principle as follow ，because slime has certain viscous ,in a dry process ,slime into dry wet after points following several workspace machine:
(1)Guiding material area , Wet coal from the area and high temperature hot air contact rapidly evaporate moisture ;
(2)Cleaning area ，Wet coal slime within this region copied board start to copy form material curtain state，Material falls easily formed binding roller wall phenomenon ，in this area because of equipment design have cleaning device , Cleaning device of the dryer was very reasonably cleaned wall materials adhesion , in the
process,cleaning device for material regiment caking also play crushing effect ,to increase the heat transfer area , improve drying rate ;
(3)Tilt Yang stripper plate area , Wet coal slime within this region has a low moisture loose state ,in this area material has not bond phenomenon , After heat required material reached the required moisture state ,going into the final material area ;
(4) the discharging area , Roller in the area does not set copy plate , material within this region scroll glide to a discharging port ,completing the whole drying process .
2) The Main Characteristic of Slime Dryer
http://www.kf-machinery.com/coal-slime-dryer.html
(1) Slime dyer own resistance to overload ability , large capacity per unit area , fule consumption less ,dry cost is low ;
(2) Adopt downstream drying methods , smoke and wet materials with side by entering drying machine , use high temperature fume achieve very high evaporation strength , the dryer export low temperature ,high thermal efficiency ;
(3) According to different material properties change operation parameters in the dryer, make the material form a stable cylinder body all the broken fabrics act, qualitative heat more fully ;
(4) New feeding and discharging device, to eliminate the drum drying machine feeding jams, discontinuity, uneven return material phenomenon, reduced dust removal system load ;
(5) New internal structure , Strengthened the already scattered materials to clean and heat transfer effect , eliminates the cylinder body wall of material with sticky phenomenon, moisture, sticky adaptability stronger; ;
(6)The dryer realized the "zero horizontal thrust", greatly reducing the roller of retaining wear cylinder smooth operation and reliable ;
(7)The dryer adopt "self-aligning roller device of roller and", the tyre-roller cooperation always linear contacts, which greatly reduces the wear and power loss ;
(8)According to user requirements control product size and moisture, drying slime products , moisture can reach under 8% , particle can be controlled in 8mm below ;http://www.kf-machinery.com/coal-slime-dryer.html
MORE DETAILS IN: www.kf-machinery.com www.mineselect.com www.cnbestmill.com |
| |
|
|
