| Message | Corrugated boxes supplier Corrugated Box Manufacturers www.corrugated-box-manufacturers.com
The thickness of the wire saw blade should line and crease line thickness cutting knife to adapt. 6, with the guillotine line, curved line machines, punching machines and other machinery according to box-shaped knife rolling off the line, curved or bent round a variety of angles. Crosscut knife line height is 23.8 mm, thickness of 0.7 mm, embedded die-die-on-line must be highly consistent. Crease height and thickness of the line depends on the thickness of the blade of the paper. Crease knife cutting knife wire line height is the height minus the thickness of paper can be. After the knife embedded in the line, both sides want to paste foam rubber, so the cardboard from the die-pop. 7, overcast template in order to get a good seam, good insulation paper posted at the plate, into the machine, put carbon paper, then cover a layer of jam, start the machine press down to get the indentation in the indentation out of the crease line. In this paper, corrugated paper box factory from Guangzhou Huadu reorganization ysyasheng
Author:
Time:
Source: |
